Skip to main content

Room thermostat, surface-mounted super flat, 5…30…°C, 230V AC, 2(1)A, NC contact

RTBSB-201.000

Room thermostat, surface-mounted super flat, 5…30…°C, 230V AC, 2(1)A, NC contact

Electromechanical room thermostat in super-flat surface-mounted housing (only 13.9mm deep) for controlling or monitoring temperatures in offices, living rooms, and hotels. The thermal feedback achieves a very accurate switching differential. The setting range can be changed with the range restriction located under the setting knob. The unit is mounted by means of surface/wall mounting (4-hole fastening on the flush-mounted box).
Suitable for hot water heating systems.
  • play pause
  • Art.-Nr.: MA300000

    Technical data

    Actual temperature display No
    Ambient temperature, lower value 0 °C
    Ambient temperature, upper value 30 °C
    Assembly Complete device
    Bearing temperature, lower value -20 °C
    Bearing temperature, upper value 70 °C
    Colour Pure white
    Connection cross-section 0,12 mm² bis 2,5 mm²
    Control behaviour 2-point
    Control range, lower value 5 °C
    Control range, upper value 30 °C
    Cooling control function No
    Depth 13,9 mm
    Design Berlin 1000
    Display No
    ECO function (reduction) No
    Electric connection Screw terminals
    Electronic control No
    Energy efficiency class I
    External setting Yes
    Heating / cooling switch No
    Heating control function Yes
    Heating display No
    Height 78,5 mm
    Housing material Plastic ABS
    Internal setting No
    Maximum air humidity (non-condensing) 95 % r.H
    Maximum power consumption < 0.25 W
    Maximum switching current 2 (1) A
    Maximum switching voltage 230 V AC, 50 Hz
    Mechanical range reduction Yes
    Medium Air, not aggressive
    Minimum switching voltage 230 V AC / 50 Hz
    Mounting / attachment Surface mounting
    Number of control ranges 1
    Number of outputs 1
    Number of outputs, heating 1
    On / Off switch No
    Operating voltage 230 V AC / 50 Hz
    Operation Rotary knob
    Output signal Switching (230 V AC, 50 Hz)
    Potential free switching contact No
    Protection class II, following appropriate mounting
    RAL colour number (similar) 9010
    Safety and EMC In accordance with DIN EN 60730
    Scale Degree Celsius
    Sensor element Bimetal
    Sensor external No
    Surface properties Gloss
    Switching contact NC contact
    Switching difference Approx. 0.5 K (delta T max. 4 K/h)
    Switching difference, can be adjusted No
    Switching element Bimetal contact
    Switching power 460 W
    Temperature controller version Room thermostat
    Test mark approval CE
    Thermal feedback Yes
    Type of protection IP30
    Width 78 mm
    With explosion protection No
    Circuit diagram  Circuit diagram

    Downloads

    Instructions

    Datasheet

    Photo Type Articlenumber Features Kind
     

    Contact request

     

    Do you have questions or are you interested in our products?

    Please contact the electrician you trust or write us a message.

    Close Menu