RTBSU-401.052#21
Room thermostat, flush-mounted, 230V AC, NC contact, additional heating display/switch, alre frame, cover 50x50mm, pure white, gloss
Electro-mechanical flush-mounted room thermostat for controlling and monitoring of temperatures in offices, residential properties and hotels. Provides a perfect visual match in many switch ranges without any intermediate frames. Suitable for all types of heating. Additional heating can be switched on using a switch. A red light indicates when additional heating has been activated. The total current (heating + additional heating) must not exceed 10 (4) A. The total output (heating + additional heating) must not exceed 2300 W. Thermal feedback is used to obtain a very accurate switching difference. The setting range can be adjusted using the range reducer located under the adjustment knob. Simple electric connection without screws. New terminals for quick and easy installation. Simplified wiring thanks to colour-coded terminals. The modular principle saves time: Controller, frame and cover are mounted in a practical order. Small installation volume for quick and easy mounting in flush-mounted socket. Temperature control possible even without cover. Closed design. Optimum screw seat.
Art.-Nr.: UA090015
Technical data
| Actual temperature display | No |
| Additional heating display | Yes |
| Additional heating switch | Yes |
| Ambient temperature, lower value | 0 °C |
| Ambient temperature, upper value | 30 °C |
| Assembly | Complete device |
| Bearing temperature, lower value | -20 °C |
| Bearing temperature, upper value | 70 °C |
| Colour | Pure white |
| Connection cross-section | 1,0-2,5mm² (rigid), 0,75–1,5mm² (flex.) |
| Control behaviour | 2-point |
| Control range, lower value | 5 °C |
| Control range, upper value | 30 °C |
| Cooling control function | No |
| Depth | 41,8 mm |
| Design | Berlin UP |
| Display | No |
| ECO display | No |
| ECO function (reduction) | No |
| Electric connection | Spring push-lock terminals |
| Electronic control | No |
| Energy efficiency class | I |
| External setting | Yes |
| Heating / cooling switch | No |
| Heating / off / cooling switch | No |
| Heating control function | Yes |
| Heating display | No |
| Height | 85 mm |
| Housing material | Plastic PA6, cover/frame PC |
| Internal setting | No |
| Maximum air humidity (non-condensing) | 95 % r.H |
| Maximum power consumption | < 0.5W |
| Maximum switching current | 10 (4) A |
| Maximum switching voltage | 230 V AC, 50 Hz |
| Mechanical range reduction | Yes |
| Medium | Air, not aggressive |
| Minimum switching voltage | 230 V AC / 50 Hz |
| Mounting / attachment | Flush mounting (deep socket recommended) |
| NEMA type of protection | Other |
| Number of control ranges | 1 |
| Number of outputs | 2 |
| Number of outputs, heating | 2 |
| On / Off switch | No |
| Operating voltage | 230 V AC / 50 Hz |
| Operation | Rotary knob and switches |
| Output signal | Switching (230 V AC, 50 Hz) |
| Potential free switching contact | No |
| Protection class | II, following appropriate mounting |
| Protective cap | No |
| RAL colour number (similar) | 9010 |
| Reduction / heating / external reduction switch | No |
| Reduction switch | No |
| Safety and EMC | In accordance with DIN EN 60730 |
| Scale | Index number scale |
| Sensor element | Bimetal |
| Sensor external | No |
| Surface properties | Gloss |
| Switching contact | NC contact |
| Switching difference | Approx. 0.5 K (delta T max. 4 K/h) |
| Switching difference, can be adjusted | No |
| Switching element | Bimetal contact |
| Switching power | 2300 W |
| Temperature controller version | Room thermostat |
| Test mark approval | CE |
| Thermal feedback | Yes |
| Type of protection | IP30 |
| Type of wiring | Three-/four-wire |
| Width | 81 mm |
| With explosion protection | No |
| Circuit diagram | |
| Photo | Type | Articlenumber | Features | Kind |
|---|
Contact request
Do you have questions or are you interested in our products?
Please contact the electrician you trust or write us a message.
