Skip to main content

Heating valve actuator, 230V AC, closed when de-energised

ZBOOA-010.100

Heating valve actuator, 230V AC, closed when de-energised

Electro-thermal valve actuators for heating, ventilation, and air-conditioning technology. The actuator is very space-saving due to its compact design. The tapered design, especially in the mounting area of the nut, makes installation easy to handle. The fastening cable is not located in the area of the fastening nut. This reduces the likelihood of contact with devices carrying heating water. Since the fastening nut allows the valve to be screwed continuously onto the thread, in contrast to bayonet and snap couplings, the valve can be opened in a de-energized state by turning the nut back by two to three thread turns. Leaking water is drained off via a drainage system. A special design has made it possible to dispense with seals. The current valve position is displayed at 2 positions (top and side). Due to their fastening of M 30 x 1.5 and their characteristic (normally closed), the actuators are suitable for the following valve and distributor brands, among others: Beulco, Empur, Heimeier, Kamo, Oventrop, Purmo, SBK, SKV, Strawa, Taconova, Watts.
  • Art.-Nr.: H9100010

    Technical data

    Ambient temperature, lower value 0 °C
    Ambient temperature, upper value 50 °C
    Average power consumption 3 W
    Bearing temperature, lower value -20 °C
    Bearing temperature, upper value 70 °C
    Cable length 0,8 m
    Colour Pure white
    Connection cross-section 2 x 0,5 mm²
    Control signal Two-point
    Depth 57 mm
    Function type: Closed when de-energised
    Height 57 mm
    Housing material Plastic PC, GF (20 %)
    Max. switch-on current Ca. 0,3 A
    Maximum air humidity (non-condensing) 95 % r.H
    Maximum power consumption 70 W
    Mounting / attachment M30x1.5
    Nominal closing force 90 N
    Nominal stroke 3 mm
    Operating voltage 230 V AC / 50 Hz
    Protection class II, following appropriate mounting
    RAL colour number (similar) 9010
    Running time 240 s
    Safety and EMC In accordance with DIN EN 60730
    Temperature controller version Valve actuator
    Type of protection IP42
    Valve setting display Double (top and side)
    Width 39 mm

    Downloads

    Assembly instructions

    Datasheet

    Photo Type Articlenumber Features Kind
     

    Contact request

     

    Do you have questions or are you interested in our products?

    Please contact the electrician you trust or write us a message.

    Close Menu