Skip to main content

Room thermostat with temperature display, surface-mounted super-flat, 5…30°C, 230VAC, 3(0.5) A, make contact

HTRRBd-210.100

Room thermostat with temperature display, surface-mounted super-flat, 5…30°C, 230VAC, 3(0.5) A, make contact

This room temperature controller has been specially developed for controlling or monitoring temperatures in offices, living rooms and hotels and is suitable for direct connection of up to 10 valve drives (normally closed) for hot water heating systems. In normal operation, the display is deactivated. Touching a touch surface displays the current room temperature. If a touch surface is touched during this display, the desired setpoint temperature can be adjusted in 1°C steps..
  • play pause
  • Art.-Nr.: MA700800

    Technical data

    Actual temperature display Yes
    Ambient temperature, lower value 0 °C
    Ambient temperature, upper value 40 °C
    Assembly Complete device
    Average power consumption 0,5 W
    Bearing temperature, lower value -20 °C
    Bearing temperature, upper value 70 °C
    Colour Pure white
    Connection cross-section 0,33 mm² bis 1,5 mm²
    Control behaviour 2-point
    Control range, lower value 5 °C
    Control range, upper value 30 °C
    Cooling control function No
    Depth 13,9 mm
    Design Berlin 1000
    Display Yes
    Display type Two-digit 7 segment display (white)
    ECO function (reduction) No
    Electric connection Screw terminals
    Electronic control Yes
    Energy efficiency class IV
    External setting Yes
    Heating control function Yes
    Height 78,5 mm
    Housing material Plastic ABS
    Internal setting No
    Maximum air humidity (non-condensing) 95 % r.H
    Maximum power consumption < 1 W
    Maximum switching current 3 (0,5) A
    Maximum switching voltage 230 V AC, 50 Hz
    Minimum switching voltage 230 V AC / 50 Hz
    Mounting / attachment Surface mounting
    Number of outputs 1
    Number of outputs, heating 1
    Operating voltage 230 V AC / 50 Hz
    Operation Touch-sensitive buttons
    Output signal Switching (230 V AC, 50 Hz)
    Potential free switching contact No
    Protection class II, following appropriate mounting
    RAL colour number (similar) 9010
    Safety and EMC In accordance with DIN EN 60730
    Scale Degree Celsius
    Sensor element NTC internal
    Surface properties Gloss
    Switching contact Normally open contact
    Switching difference Approx. 0.5 K (delta T max. 4 K/h)
    Switching element Relay
    Switching power 690 W
    Temperature controller version Room thermostat
    Test mark approval CE
    Type of protection IP30
    Width 78 mm
    Circuit diagram  Circuit diagram

    Downloads

    Assembly instructions

    Datasheet

    Photo Type Articlenumber Features Kind
     

    Contact request

     

    Do you have questions or are you interested in our products?

    Please contact the electrician you trust or write us a message.

    Close Menu