VOOPL-318.178
Terminal strip, max. 8 room thermostats and 16 valve actuators, IP20
This device was developed especially for wiring 230 V~ single-room temperature controller with the associated valve actuators for permanent mounting. The terminal strip is suitable for both heating controllers with and without ECO function as well as heating / cooling controllers with integrated heating / cooling changeover. Master-slave regulation is achieved using a controller with clock or an external timer. Depending on the controller used, valve actuators with NC (normally closed) or NO (normally open) direction of operation may be connected to this terminal strip.
Art.-Nr.: DA480520
Technical data
| Ambient temperature, lower value | -10 °C |
| Ambient temperature, upper value | 50 °C |
| Assembly | Terminal strip, fastening screws |
| Bearing temperature, lower value | -20 °C |
| Bearing temperature, upper value | 70 °C |
| Colour | Anthr. grey (RAL7016), frontp. transp. |
| Connection cross-section | 0,75 – 1,5mm² (rigid), 0,5 – 1mm² (flex.) |
| Cooling control function | Yes |
| Depth | 62 mm |
| Electric connection | Spring push-lock terminals |
| Heating control function | Yes |
| Height | 100 mm |
| Housing material | Plastic PC |
| Maximum air humidity (non-condensing) | 95 % r.H |
| Maximum switching voltage | 230 V AC, 50 Hz |
| Minimum switching voltage | 230 V AC / 50 Hz |
| Mounting / attachment | Surface mounting or standard rail |
| Number of channels/zone | 8 |
| Number of outputs | 8 |
| Operating voltage | 230 V AC / 50 Hz |
| Potential free switching contact | No |
| Protection class | II, following appropriate mounting |
| Surface properties | Gloss |
| Type of protection | IP20 |
| Width | 255 mm |
| Circuit diagram | |
| Photo | Type | Articlenumber | Features | Kind |
|---|
Contact request
Do you have questions or are you interested in our products?
Please contact the electrician you trust or write us a message.
